NIR Spectroscopy and Chemometric surveys, polls and assessmentsNIR Spektroskopie und Chemometrie Umfragen, Erhebungen und WertungenSpettroscopia NIR e chemiometria sondaggi, indagini e valutazioni


1. Calibration Developers
How many persons in your company are able to develop a NIR Calibration?


2. Calibration Development
How much time do you spend to develop a calibration model?


3. Chemometric Software / Spectroscopy Software
Which Chemometric Software are you using for NIR?


4. NIR Spectrometer Brand
Which NIR Spectrometer Brand do you use?


Please vote and see the assessments below.

Part 2, Part 3
[yop_poll id="5"] [yop_poll id="4"]
[yop_poll id="2"] [yop_poll id="3"]


Part 2, Part 3

1. Calibration Developers

Wie viele Personen in Ihrem Unternehmen sind in der Lage, eine NIR-Kalibrierung zu entwickeln?

2. Calibration Development

Wie viel Zeit benötigen Sie um ein Kalibrierungs Modell zu entwickeln?

3. Chemometrie Software / Spectroskopie Software

Welche Chemometrische Software verwenden Sie für NIR?

4. NIR Spectrometer Brand

Welche NIR-Spektrometer Marke verwenden Sie?

Bitte stimmen Sie und sehen Sie die Einschätzungen unten.

Teil 2

[yop_poll id="5"] [yop_poll id="4"]
[yop_poll id="2"] [yop_poll id="3"]

1. Calibration Developers

How many persons in your company are able to develop a NIR Calibration?

2. Calibration Development

How much time do you spend to develop a calibration model?

3. Chemometric Software

Which Chemometric Software are you using for NIR?

4. NIR Spectrometer Brand

Which NIR Spectrometer Brand do you use?

Please vote and see the assessments below.

[yop_poll id="5"] [yop_poll id="4"]
[yop_poll id="2"] [yop_poll id="3"]

What is a NIR calibration used for?Wozu wird eine NIR-Kalibrierung verwendet?

NIR calibrations are used for NIR contents analysis as a productive analytical method. That is a two step procedure.
  1. A NIR analyzer does a non-destructive optical scan of a sample that yields a measured spectrum in seconds.
  2. A NIR calibration model can quantitatively predict (analyze, determine, estimate) multiple constituents, ingredients, contents, analytes, assay, API and other parameters and attributes (chemical, physical, biological, biochemical, sensory) summarized as properties, out of a single spectrum in milli seconds.
The NIR analysis is a very fast non-destructive analysis method that can replace or backup slower methods like wet chemical analysis, chemistry laboratory, sensory panels or rheology (viscosity). Or a NIR calibration can open the door to new possibilities of analytics, quality assurance and process control, by developing calibration models for parameters that seems to be impossible, because they are based on human knowledge, empirical values or sensory like taste value. If you have an NIR instrument, you can measure your samples systematically and thus develop your own calibration models.

NIR Kalibrationen werden zur NIR Inhaltsanalyse als produktive analytische Methode verwendet. Das ist ein zweistufiges Verfahren.

  • Erstens wird mit einem NIR-Spektrometer eine zerstörungsfreie optische Abtastung einer Probe vorgenommen, das ein gemessenes Spektrum innert Sekunden liefert.
  • Zweitens kann ein NIR-Kalibrierungs Modell eine quantitative Vorhersage (analysieren, bestimmen, schätzen) von mehreren Bestandteilen, Inhaltsstoffen, Inhalten, Analyten, Assay, API und andere Parameter und Attribute (chemische, physikalische, biologische, biochemische, sensorisch) zusammengefasst Eigenschaften, aus einem einzigen Spektrum innert Millisekunden liefern.

Die NIR-Analyse ist eine sehr schnelle, zerstörungsfreie Analyse-Methode, die

ein Ersatz oder Ergänzung langsamer Methoden sein kann, wie nasschemische Analyse, Chemielabor, sensorischen Panels oder Rheologie (Viskosität).

Oder eine NIR Kalibration öffnet die Tür zu neuen Möglichkeiten der Analytik, Qualitätssicherung und Prozesskontrolle, durch die neu Entwicklung von Kalibrationsmodellen für Parameter die unmöglich scheinen, weil sie auf die menschliche Wissen, Erfahrungswerten oder sensorische, wie Geschmack Bewertung beruhen.

Wenn Sie eine NIR-Instrument besitzen, dann können Sie Ihre Proben systematisch vermessen und damit Ihre eigene Kalibrierung Modelle entwickeln.

What are pre-developed NIR pre-calibrations?Was sind vorentwickelte NIR Vor-Kalibrierungen?

There are a lot of terms that means the same, pre-calibration or NIR starter calibration or pre-built calibration or pre-installed calibration orcalibration package or pre-developed calibrations or pre-calibrated NIR or global calibrations or nir global calibration package or factory calibrations or universal near-infrared (NIR) calibrations or local calibrations or ready-to-use NIR calibrations or off-the-shelf calibrations or factory-calibrated or pre calculated model or start-up calibrations or calibration equations or prefabricated nir calibrations or calibration library or mathematical model. That are Calibration models that are prepared and developed by a calibration specialist. They have collected a lot of samples over years and measured them with NIR and analyced it with reference methods. The NIR spectra are then calibrated against the reference values. This is called a NIR calibration or calibration model or sometimes calibration curve or calibration equation. Normally a precalibration is delivered as a file that is compatible to the used NIR analysis software. Such a calibration file does not contain the spectra nor the reference values.

So how can that work?

The only thing that is in the file is a description what it is for (e.g. protein in feed) and the chemometric model that is represented and stored as list of vectors and matrices. You can't visualize them, it's a black-box file. You have no insight of how the calibration is done, how are the settings, how is the prediction performance. You can not extend the calibration with your data to adjust it to your purpose or specialty. Most often the pre calibration files are protected, so you can use it only with a paid license to your software or even to your instrument serials number. These are some (not well known) limitations you will discover if you got one. But such starter calibrations are very useful to have a fast and easy start with a new NIR spectrometer. That's the main reason why pre-calibrations are available. The second reason is that a collection of spectra can be reused to build such pre calibrations.

Predicting the future?

Are very old spectra useful to predict the future? To adjust a calibration model with newly collected data, the calibrations grows and contains more and more redundancy. That means there are very similar spectra with the same concentration range. So which spectra can be removed to make the calibration better? You maybe never ask this because often you hear, that the more spectra you put into a model the better it will be. Why to remove some spectra?
  • reduce not needed redundancy
  • makes the calibration smaller and less complex
  • makes the calibration better fit to the current situation of now and the near future
  • remove long past seasonal data if you have natural products because nature is changing
  • and of course bad outliers should be removed

Custom NIR calibrations

Build your own calibrations that perfectly fit to your specific sample matrix of your products and your preferred raw materials from your local suppliers. Nature grows differently depending on the geographical region, by seasons and year by year. As you know that NIR-Spectroscopy is not an absolute method, then you have to think about to calibrate these current changing effects into your models. If you own the spectra and the reference values then your are able to build your own calibration models and re-calibrate them when needed. So you have the full control on Calibration updates (also known as moving models).

Conclusion

A NIR-instrument can only measure NIR spectra. So the usefulness of NIR comes in with calibrations. That is very important to know when buying such an instrument. For a fast start you can use pre-built calibrations. Good reliably calibrations are offered from third party to quite high prices that level is similar to a cheaper NIR-Instrument! To continue successfully it is highly recommended to develop your own customized calibration (multivariate calibration model) with your own data from your own products, especially with the use of natural resources. Therefore you need knowledge about chemometrics and multivariate analysis (MVA), spectroscopy and the software used to get the calibration optimized. It is worthwhile to create your own calibrations, because you can calibrate product characteristics that are not covered by the proposed pre-calibrations.Es gibt eine Menge von Begriffen, die das gleiche bedeuten, Vorkalibrierung oder NIR-Starter-Kalibrierung oder vorgefertigte Kalibrierung oder vorinstallierte Kalibrierung oder Kalibrierung Paket oder vorentwickelte Kalibrierungen oder NIR Vorkalibrierung oder globale Kalibrierungen oder NIR Global Kalibrations Paket oder lokale Kalibrierungen oder ready-to-use NIR-Kalibrierungen oder Werkskalibrierungen oder Starter Kalibrierung oder Kalibrierungen von der Stange oder werkseitig kalibriert oder vorberechnete Modelle oder Start-up-Kalibrierungen Kalibrierungsgleichungen oder vorgefertigte NIR-Kalibrierungen oder Kalibrierungs Bibliothek oder mathematisches Modell. Es sind Kalibrierungs Modelle, die bereitgestellt und entwickelt wurden von einem Kalibrierungs Spezialisten. Diese haben eine Menge von Proben über Jahre gesammelt und mit NIR vermessen und mit Referenzmethoden analysiert. Die NIR-Spektren werden dann gegen die Referenzwerte kalibriert. Dies nennt man eine NIR-Kalibrierung oder Eichungs-Modell oder manchmal Kalibrierkurve oder Kalibrierungsgleichung. Normalerweise wird eine Vorkalibrierung als Datei die kompatibel zur verwendeten NIR-Analyse-Software geliefert. Eine solche Kalibrierung Datei enthält weder die Spektren noch die Referenzwerte.

Also wie kann das funktionieren?

Das einzige was die Datei enthält ist eine Beschreibung, wozu es verwendet wird (z.B. Eiweiß in Futtermitteln) und das Chemometrische Modell, repräsentiert als gespeicherte Liste von Vektoren und Matrizen. Sie können diese nicht zu visualisieren, es ist eine Black-Box-Datei. Sie haben keinen Einblick, wie die Kalibrierung erfolgt ist, wie die Einstellungen sind, wie die Vorhersage Leistung ist. Sie können die Kalibrierung nicht mit Ihren Daten erweitern um sie Ihrem Produkt oder Spezialitäten anzupassen. Meistens sind die Pre-Kalibrierung Dateien geschützt, so können Sie es nur mit einer kostenpflichtigen Lizenz mit der Software Nutzen oder sogar auch nur auf einem bestimmen Instrument z.B. via Serien-Nummer. Dies sind einige (nicht so bekannte) Beschränkungen. Aber solche Starter-Kalibrierungen sind sehr nützlich, um einen schnellen und einfachen Start mit einem neuen NIR-Spektrometer zu haben. Das ist der Hauptgrund, warum Vor-Kalibrierungen zur Verfügung stehen. Der zweite Grund ist, weil eine Sammlung von Spektren wiederverwendet werden kann, um solche Vor-Kalibrierungen zu bauen.

Die Zukunft vorhersagen?

Sind sehr alte Spektren nützlich, die Zukunft vorherzusagen? Um ein Kalibrierungs Modell mit neu gesammelten Daten anzupassen, wächst die Kalibrierung und enthält immer mehr und mehr Redundanz. Das heisst, sie besteht aus sehr ähnlichen Spektren aus dem gleichen Konzentrationsbereich. Also welche Spektren können entfernt werden, um die Kalibrierung zu verbessern? Sie stellen sich diese Frage vielleicht nicht, weil Sie oft hören, dass je mehr Spektren in ein Modell aufgenommen werden, desto besser wird es sein. Warum einige Spektren entfernen?
  • Nicht benötigte Redundanzen
  • Macht die Kalibrierung kleiner und weniger komplex
  • Passt die Kalibrierung besser an die aktuelle jetzige Situation und der nahen Zukunft an
  • Entfernen von längst vergangenen Saison Daten bei natürlichen Produkten, weil die Natur sich verändert
  • Und natürlich schlechte Ausreißer entfernt werden sollten

Benutzerdefinierte NIR Kalibrierung

Bauen Sie Ihre eigenen Kalibrierungen die perfekt angepasst sind an die spezielle Probenmatrix Ihrer Produkte und die von Ihnen bevorzugten Rohstoffe von Ihren lokalen Zulieferern. Die Natur wächst unterschiedlich, je nach geographischer Region, durch die Jahreszeiten und von Jahr zu Jahr. Wie Sie wissen, ist NIR-Spektroskopie keine absolute Methode, darum muss man darüber nachdenken, diese aktuellen wechselnden Effekte in Ihre Modelle zu kalibrieren. Wenn Sie die Spektren und die Referenzwerte besitzen dann sind Sie in der Lage, Ihre eigenen Kalibrierungs Modelle zu bauen und zu re-kalibrieren wenn nötig. So haben Sie die volle Kontrolle über Kalibrations Updates (auch als bewegte Modelle bekannt).

Schlussfolgerung

Ein NIR-Gerät kann nur NIR-Spektren messen. Also die Nützlichkeit von NIR kommt mit den Kalibrierungen. Das ist sehr wichtig zu wissen beim Kauf eines solchen Instruments. Für einen schnellen Start können Sie vorgefertigte Kalibrierungen verwenden. Gute zuverlässige Kalibrierungen werden von Drittanbietern zu  relativ hohen Preisen angeboten, im Bereich eines günstigen NIR-Instruments! Um erfolgreich voranzukommen wird dringend empfohlen, Ihre eigene Multivariate Kalibrierung mit Ihren eigenen Daten von Ihren eigenen Produkten zu entwickeln, vor allem bei Verwendung von natürlichen Rohstoffen. Daher müssen Sie das nötige Wissen über Chemometrie, Multivariate Analysis (MVA), Spektroskopie und der verwendeten Software erlangen um gut optimierte Kalibrierungen erstellen zu können. Es lohnt sich eigene Kalibrationen zu erstellen, denn so können Sie auch Produkt Eigenschaften kalibrieren, die nicht mit den angebotenen Pre-Kalibrationen abgedeckt sind.

The Ghost CalibratorDer Ghost Kalibrator

To explain our service in an other way, I use an analogy between a book and a calibration. Building good calibrations is like writing a good book (a bestseller). You can write in a foreign language (chemometrics) with a high sophisticated word-processor (the chemometric software) that has a grammar checker (an outlier detection). Due to the complexity of the language (chemometrics) and the difficulty of the chosen book topic (the data) and the incomplete automatic grammar checker, you can never be sure if the grammar is correct and may not lead to misunderstanding (bad prediction performance). So the best way is to let a native language speaker check and correct the text. In that way (the analogy), you can see us even as a ghostwriter (a ghost calibration developer, a ghostcalibrator) that helps you, writing the book (with long year experience, consolidated knowledge, time saving, a lot of benefit). The analogy fits very well, because you can define the topic of the book (with your data). Finally you own the calibration and you have the full insight in how it is done. You have it under full control.

Um unseren Service in einer anderen Art und Weise zu erklären, verwende ich eine Analogie zwischen einem Buch und einer Kalibrierung. Das Erstellen guter Kalibrierungen ist wie das Schreiben eines guten Buches (ein Bestseller). Sie können mit einer anspruchsvollen Textverarbeitung (der Chemometrie Software), die eine Grammatikprüfung (Ausreißer-Detektion) hat in einer Fremdsprache (Chemometrie) schreiben.

Aufgrund der Komplexität der Fremdsprache (Chemometrie) und die Schwierigkeit des gewählten Buch Themas (die Daten) und der unvollständigen automatischen Grammatikprüfung, können Sie nie sicher sein, ob die Grammatik korrekt ist und es nicht zu Missverständnissen (schlechte Prognose Performance) führen kann. Der beste Weg ist, den Text von einem Muttersprachler überprüfen und korrigieren zu lassen.

Auf diese Weise (die Analogie), können Sie uns auch als Ghostwriter (Ghost Kalibrations Entwickler, ghostcalibrator) sehen, der Ihnen hilft das Buch zu schreiben (mit langjähriger Erfahrung, fundiertes Wissen, Zeitersparnis, eine Reihe von Vorteilen).
Die Analogie passt sehr gut, weil Sie das Thema des Buches (mit Ihren Daten) definieren können. Zum Schluss besitzen Sie die Kalibration und Sie haben den vollen Einblick, wie es gemacht wird. Sie haben es unter voller Kontrolle.


NIR Calibration Service / NIR Kalibrations Service / Servizio di calibrazione NIR

New : free NIR-Predictor Software for all NIR instrument types! Analyze your samples.

Services and software for data analysis and analytical modeling for spectroscopy.

This NIR calibration service provides the custom development of optimal quantitative NIR calibration models based on your collected NIR and reference data for vendor independent full range NIR spectrometer analyzers (NIR = Near Infra Red spectroscopy) based on chemometric multivariate methods like Partial Least Square Regression (PLS, PLSR) and Principal Component Regression (PCR).

The key points

The NIR calibration model is decisive for the analysis accuracy.

NIR analysis results make the difference.

Near-Infrared Data Modeling Calibration Service

The problems

Imagine how many publications and literature of NIR spectroscopy (JNIRS) and chemometrics (Journal of Chemometrics) is present.

Did you find the time for the right to designate to read, to study, to incorporate them into practice?

Do you have all this knowledge at your calibration developments always present, that you consider anything important, the statistical results, interpret them correctly, analyze the graphs accurately and apply all the tips & tricks of optimizing correctly?

We have the solution for you!

We'll help you to create and optimize your calibrations.
We will help you for the time-consuming and knowledge-intensive part.
You get the best calibration solution and decide for yourself

Try it and see for yourself

New : free NIR-Predictor Software for all NIR instrument types! Analyze your samples.


Dienstleistungen und Software für die Datenanalyse und analytische Modellierung für die Spektroskopie.

Dieser NIR Kalibrations Service bietet die kundenspezifische Entwicklung von optimalen quantitativen NIR-Kalibrierungs Modellen für Ihre gesammelten NIR und Referenzdaten für herstellerunabhängige full-range NIR-Spektrometer Analysatoren an (NIR = Nah InfraRot-Spektroskopie) basierend auf chemometrischen multivariaten Methoden wie Partial Least Square Regression (PLS, PLSR) und Principal Component Regression (PCR).

Die Kernpunkte

Das NIR Kalibrations Modell ist entscheidend für die Analysen Genauigkeit.

NIR-Analysen Ergebnisse machen den Unterschied.

Near-Infrared Data Modeling Calibration Service

Die Probleme

Stellen Sie sich vor, wie viele Publikationen und Literatur zum Thema NIR (JNIRS) und Chemometrie (Journal of Chemometrics) vorhanden ist.

Haben Sie die Zeit, die für Sie die passende zu finden, zu bestellen, zu lesen, zu studieren, in die Praxis einfließen zu lassen?

Haben Sie dieses ganze Knowhow bei Ihren Kalibrations-Entwicklungen immer präsent, dass Sie alles wichtige Berücksichtigen, die statistischen Ergebnisse richtig deuten, die Grafiken genau analysieren und alle Tips & Tricks und Regeln der Kunst des Optimierens korrekt anwenden?

Wir haben die Lösung für Sie!

Wir helfen Ihnen, Ihre Kalibrationen zu erstellen und zu optimieren.
Wir helfen Ihnen für den zeitaufwendigen und Knowhow Intensiven Teil.

Sie erhalten die optimale Kalibrations Lösung und entscheiden selbst.
Probieren Sie es aus und sehen Sie selbst.

New : free NIR-Predictor Software for all NIR instrument types! Analyze your samples.


Servizi e software per l'analisi dei dati e la modellazione analitica per spettroscopia.

Il servizio di calibrazione NIR fornisce lo sviluppo personalizzato di modelli quantitativi di calibrazione NIR ottimizzati in base alla banca dati NIR presente nei vostri data base e con ulteriori dati di riferimento di fornitori indipendenti di spettrofotometri NIR (NIR = spettroscopia nel vicino infrarosso) sulla base di metodi chemiometrici multivariati come la funzione di regressione Least Square (PLS, PLSR) e delle Componenti Principali (PCR).

Il modello di calibrazione NIR è determinante per l'accuratezza dell'analisi. Sono i risultati delle analisi NIR a fare la differenza.

Near-Infrared Data Modeling Calibration Service

Immaginate quante pubblicazioni e letteratura sulla spettroscopia NIR (JNIRS) e persone che si occupano di chemiometria (Journal of Chemiometrics) siano presenti.

Non avete il tempo per leggere, studiare e far pratica su questo?

Avete tutta questa conoscenza a portata di mano per avere sviluppi di calibrazione sempre aggiornati da esperti; Cosa credete sia più importante: i risultati statistici, interpretarli correttamente, analizzare i grafici accuratamente e applicare tutti i consigli e i trucchi per ottimizzare correttamente i metodi di calibrazione?

Noi abbiamo la soluzione per voi!

Vi aiuteremo a creare e ottimizzare le tarature.
È possibile ottenere la migliore soluzione di calibrazione per Voi. Prova e vedere di persona