Get the optimal wavelengths or wavenumber selection ranges for your NIR-Application

This is very useful for chip sensor manufacturers to reduce detector/sensor hardware cost or reducing scanning time by leaving out or over skipping the gaps in the wavelength range for dedicated applications.

Use cases

  • Application Developers get useful information for their own NIR model development process or insight model validation.
  • Chip sensor manufacturers can reduce detector/sensor hardware cost
    • The array can be restricted to the minimum necessary area/pixels for a specific application, allow lower sensor cost.
  • Dedicated application / sensor device suppliers can reduce scanning time
    • The measurement process can skip over the gaps (MEMS) in the wavelength range for dedicated applications, allow faster measurement time.

Why do Wavelength Selection for Calibration and Prediction?

  • Because the selected wavelength / wavenumber range depends heavily on the specific application.
  • To eliminate unwanted or noisy wave bands from the measured samples (application), optical path (e.g. fiber optics) or detector ranges (signal to noise).
  • The Data-Preprocessing does ignore noisy wave bands (no artifacts or amplifying noise).
  • The model robustness can be increased.
  • The model prediction performance (accuracy, precision) can be increased.

How it works

  1. Send your NIR and Lab-data to create an fully optimized calibration for your NIRS-Application (how the Calibration Model service works, see NIR-Predicor, see also Anonymize your NIR spectroscopy data).
  2. You can test the calibration on new measured NIR data with the free NIR-Predictor software.
  3. Get payed access to the selected wavelengths of the optimize calibration.
  4. The selected wavelengths are delivered in the form of
    “7828-6476, 5560-4208 [1/cm] (number of data points = 678).”
    If you supply the spectral data in wavelengths [nm] instead of wavenumbers [1/cm], this is taken into account accordingly.
    The number of data points of the “number of data points” selection is specified for control purposes to check whether the interpreted ranges include the number of points.

Pricing

See also Anonymize your NIR spectroscopy data

Learn more about NIR-Predicor

Keywords:

NIR Absorption Bands
, Near Infrared Absorption Bands
, NIR absorbance peaks
, wavenumber and wavelength ranges
, combination bands
, functional groups CH, CH2, CH3, CHO, NH2, OH, ArOh, ArCH, CONH2, H2O
, How to find the most relevant predictors in NIR
, variable selection to improve stability and prediction
, subset selection methods
, NIR wavelength range
, NIR wavenumber range
, NIR wavelengths selection
, NIR wavenumbers selection
, NIR variable selection
, select predictors
, variable selection in multivariate data
, reduce model complexity
, NIR predictors selection
, significant variables selection
, select significant variables
, NIR multivariate predictors selection
, influence of spectral range and resolution on model performance
, Erhalten Sie die optimalen Wellenlängen oder Wellenzahl-Auswahlbereiche für Ihre NIR-Anwendung
, Ottenere le lunghezze d’onda ottimali o le gamme di selezione del numero d’onda per la vostra applicazione NIR.

Get access to how the NIR Calibration and Prediction Model is Optimized, validated and what are the settings, pre-processing, variable-selection, outliers

Access the information of the complete calibration settings

Get access to the information of the complete settings of the optimized calibration, including selected wavelengths, data pre-processings, selected calibration spectra, validation spectra, test spectra, outlier spectra and complete prediction performance statistics, and detailed prediction information of all spectra.
It includes complete Intellectual Property (IP) and allows to re-create the model in any chemometric software.
The information is delivered within a .zip file that contains a HTML page with text, tables and images that can be printed to PDF with your browser.

The Calibration Report contains all the selected data and parameter settings details to re-create the model in any chemometric software and it’s comparable by statistics and visually.

Here is an example Calibration Report

Pricing

NIR-Predicor

Access the information of the selected wavelengths

Get access to the information of the selected wavelengths that are used in the optimized calibration. This will look like “4467-5378, 6458-7569, 8247-9852 [1/cm]” for wavenumbers or similar in nanometers [nm] depending on your data. This is very useful for sensor manufacturers to reduce detector/sensor hardware cost or reducing scanning time by leaving out or over skipping the gaps in the wavelength range for dedicated applications.

Wavelength Selection

Erhalten Sie Zugriff darauf, wie das NIR-Kalibrierungs- und Vorhersagemodell optimiert, validiert und was sind die Einstellungen, Vorverarbeitung, Variablenauswahl, Ausreißer.


Ottenere l’accesso a come il modello di calibrazione e previsione NIR è ottimizzato, convalidato e quali sono le impostazioni, la pre-elaborazione, la selezione variabile, i valori erratici.